China supplier Cheap Price Overhead Track Conveyor Drive Chain Uh-5075

Product Description

 

Detailed Photos

 

Product Description

An overhead conveyor is a type of conveyor system that is installed above the working area, typically in a manufacturing or industrial setting. It is used to move products, materials, or components from 1 point to another in a factory or warehouse, and is particularly useful for transporting heavy or bulky items that are difficult to move manually.

Overhead conveyors are commonly used in a variety of applications, such as automotive assembly lines, food and beverage processing, material handling and distribution, and storage and retrieval systems. They can be used for both horizontal and vertical transportation and can move products along a fixed path or in a continuous loop.

Some specific uses of overhead conveyors include:

  1. Assembly line transportation: Overhead conveyors are commonly used in manufacturing assembly lines to transport parts and components to different workstations along the line.

  2. Powder coating: Overhead conveyors are used in powder coating operations to move products through a paint booth, where they are coated with a dry powder before being cured in an oven.

 

Spare parts item Features Photo
Up-Down track for rising or falling areas. standard diameter is 1.2 meters,180º angle. it can be cut based on any necessary angles of any install conditions.the angle should not be more than 45º angle. the distance between 2 adjiacent hangers should be considered.
Check track There is a hatch which can open the track, through the hatch, worker can dismantle or install, check or maintain the conveying chains. Driving device for each conveying route is usually located between driver and take-up device for easy checking and maintenace.
Take-up device

(Tensioner)

Keep the chains in the state of original tension and compensate for the tensile deformation caused by tensile force or telescopic deformaton caused by varied temperature while working.
Make sure certain tensile force between driver and take-up device.   Install it behind driver about distance 3~6 meters. Better have no up-down track behind take-up device. 
Straight track for where conveyor chain go straight. it can be cut according to the specific install condition. standard length is 3 meters.
Caterpiller driver device Two types-Standard type and heavy duty type.
The driving device adjust the momentum that the motor ouput, after speed reduction unit increase its power which is to be passed to the driver caterpiller, the pusher dogs on which transport the chain so that chain can move forward.
Hanger  
Several types hangers:

Cross type hanger;

Y type hanger;

I type hanger;

Sprocket wheel hanger;

U-type hanger;

Bearing hanger;

Customized.

Automatic oil sprayer Specially designed for various automatic conveying chain;

More convenient to check oil-feeding diyusyion nsdrf CHINAMFG oil volume in the transparent oil pipes.

 

 
 

 

FAQ

Q1: Are you trading company or manufacturer ?
A: We are factory.

Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 30 workdays.
2.Production Lead-times: 60 workdays after getting your deposit.

Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.
We’ll show you the photos of the products and packages before you pay the balance.

Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.

Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Alloy
Structure: Combined Chain
Surface Treatment: Polishing
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

drive chain

How does the lubrication method affect the performance of a drive chain?

The lubrication method used for a drive chain has a significant impact on its performance and longevity. Here is a detailed explanation:

Proper lubrication is essential for ensuring the smooth and efficient operation of a drive chain. It reduces friction, minimizes wear, and prevents corrosion between the chain’s moving parts. The lubrication method chosen can affect the performance of the drive chain in the following ways:

  • Reduced Friction and Wear: Adequate lubrication forms a protective layer between the chain’s moving parts, reducing metal-to-metal contact and minimizing friction. This helps to prevent excessive wear, elongation, and premature failure of the chain. The lubricant acts as a barrier, allowing the chain to operate with reduced resistance and improved efficiency.
  • Heat Dissipation: Proper lubrication helps dissipate heat generated by the friction between the chain’s components during operation. This prevents overheating and the potential degradation of the lubricant, ensuring the chain can operate within its designed temperature range. Effective heat dissipation contributes to the longevity and optimal performance of the drive chain.
  • Protection against Corrosion: Lubrication provides a protective coating on the chain, safeguarding it against moisture, contaminants, and corrosive substances. This is particularly important in environments where the chain is exposed to water, chemicals, or harsh operating conditions. The lubricant prevents rust and corrosion, preserving the integrity of the chain and extending its service life.
  • Reduction of Noise and Vibration: Proper lubrication helps to reduce noise and vibration generated by the drive chain during operation. It acts as a damping agent, absorbing and minimizing the transmission of vibrations, resulting in smoother and quieter chain operation. This contributes to a more comfortable and productive working environment.
  • Selection of Lubricant: The choice of lubricant depends on various factors, including the application, operating conditions, temperature, speed, and load requirements. Different lubricants, such as oils, greases, or solid lubricants, may be suitable for different applications. The lubricant must be compatible with the chain material and should possess the necessary viscosity, temperature resistance, and lubricating properties to meet the specific demands of the drive chain.
  • Appropriate Lubrication Frequency: The lubrication method also includes determining the appropriate frequency for lubrication. Regular lubrication intervals must be established based on the chain’s operating conditions and the manufacturer’s recommendations. Insufficient lubrication or over-lubrication can both lead to performance issues, such as increased friction, poor lubricant distribution, or accelerated contamination buildup.

It is crucial to follow the manufacturer’s guidelines and recommendations regarding lubrication methods, lubricant types, and lubrication intervals for the specific drive chain. Regular inspection and maintenance should be conducted to monitor the lubrication effectiveness and ensure proper lubricant replenishment.

By selecting the appropriate lubrication method and maintaining proper lubrication, operators can optimize the performance, reliability, and lifespan of the drive chain, contributing to smoother operation, reduced wear, and improved overall efficiency.

drive chain

What are the benefits of using a high-speed drive chain?

Using a high-speed drive chain offers several benefits compared to standard drive chains when operating in applications requiring fast and efficient power transmission. Here is a detailed explanation:

High-speed drive chains are specifically designed and engineered to withstand the demands of rapid rotational speeds while maintaining optimal performance. The benefits of using such chains include:

  • Increased Power Transmission: High-speed drive chains are designed to handle higher rotational speeds, allowing for increased power transmission capabilities. They enable efficient and reliable transfer of power, ensuring smooth and consistent operation at elevated speeds.
  • Enhanced Durability: High-speed drive chains are constructed using materials and manufacturing techniques that provide enhanced durability and resistance to wear and fatigue. These chains are designed to withstand the increased stresses and forces associated with high-speed operation, resulting in a longer service life and reduced maintenance requirements.
  • Reduced Friction and Heat Generation: High-speed drive chains are engineered to minimize friction and heat generation during operation. This helps to reduce energy losses, maintain higher efficiency, and prevent excessive wear on the chain and related components. It also contributes to the overall smooth operation and longevity of the chain.
  • Precision and Accuracy: High-speed drive chains offer precise and accurate power transmission, ensuring synchronization and alignment of components even at elevated speeds. This is crucial in applications where precise timing and coordination are essential, such as in high-speed machinery or automated systems.
  • Improved System Performance: By utilizing high-speed drive chains, the overall performance of the system can be enhanced. These chains enable rapid acceleration and deceleration, quick response times, and efficient power transfer, leading to improved productivity, reduced cycle times, and optimized system performance.
  • Application Versatility: High-speed drive chains can be utilized in a wide range of industries and applications that require fast and efficient power transmission. They are commonly used in high-speed machinery, automation systems, packaging lines, conveyor systems, and other applications where speed is a critical factor.

It is important to consider the specific requirements of the application, including load capacity, speed capabilities, lubrication requirements, and maintenance considerations when selecting a high-speed drive chain. Regular inspection, lubrication, and tension adjustment are crucial to ensure optimal performance and longevity of the drive chain in high-speed applications.

By utilizing high-speed drive chains, operators can benefit from increased power transmission capabilities, enhanced durability, reduced friction and heat generation, improved precision, and optimized system performance in applications that demand high-speed operation.

China supplier Cheap Price Overhead Track Conveyor Drive Chain Uh-5075  China supplier Cheap Price Overhead Track Conveyor Drive Chain Uh-5075
editor by CX 2024-04-04

Chain Sprocket

As one of the leading chain sprocket manufacturers, suppliers, and exporters of mechanical products, We offer chain sprockets and many other products.

Please contact us for details.

Manufacturer supplier exporter of chain sprockets.

Recent Posts