China Sprocket 14t-520 Rear Sprocket for Motorcycle chain sprocket

Merchandise Description

Merchandise Description

Bike PARTS  Transmission Components Sprocket 

Q+A

1. What is the thickness of the sprocket?
six.8-7mm

two. What is your floor therapy for the sprocket?
We have copper, candle blue, pink, white, blue white, black, silver white toast painting, higher frequency.

3. What’s the hardness right after the sprocket make heat treatment method?
1571 content hardness is thirty-40HRC, 1045 materials hardness is forty-45HRC

four. How prolonged is your sprocket perform?
Sprocket 1571 substance with heat therapy can perform fifteen, 000km, 1045 materials with warmth treatment can operate 20, 000km

five. What manufacturer sprocket can you offer?
We make our very own model, of training course can make OEM manufacturer, with your approved letter and sign-up manufacturer letter

6. What is your delivery time for sprocket?
Typically thirty times right after receiving your deposit

Motorcycle sprocket, entrance sprocket, rear sprocket, chain established, sprocket set, motorbike elements, motorcycle sprocket established, motorcycle sprocket wheel, chain sprocket, motorcycle components, motorbike gear, timing sprocket, front sprocket, motorbike wheel, sprocket package, motorcycle spare components, sprocket wheel, chain wheel, sprocket, sprocket equipment, normal sprocket are very good top quality and not only common sprocket, we also create the sprocket as per your drawing and achieve OEM good quality stage.

Item Identify Rear Sprocket
Content C45, A3, 40Cr, 20CrMnTi, 42CrMo, copper, stainless steel and so on as for each your ask for
Procedure Forged
Heat Therapy High frequency quenching, heat remedy, hardened teeth
Floor Treatment Chrome plated, zinc plated, coloration portray, or buyer necessity
Efficiency High precision, substantial put on resistance, lower sounds, smooth and regular, high toughness
Design we can provide
YAMAHA  JOG50, SR50, YB50, YB80, YB100, JY55, CX50, V50, V80, V90, COMET, CPI, T50, NF50, 
NF55, NX50, AXIS90, AXIS100, RS100, DX100, SRZ150, YBR125, Y110,XH100, LC100, 
DX100, YAMAHA 100, YAMAHA250, And so forth
  HONDA  GY6,BT50, LEAD50, WS100, WS110, CG125, CG150, WY125, WY150, GL125, CD100,
CD110, JH125, JH90, C70, C75, C100, C110, QJ110, L90, DY100, JL100,QJ100, SY150,
CB150,TITAN00/ninety nine,XL125, XL185, NXR125,H100S,And so forth
  SUZUKI  FR50,  FR80, AD50, AD60, AG50, AG60, A100, AX100, K90, FB70, FB100, K100, K125,
MAX100, GP125, GS125 ,And so forth
  BAJAJ  BOXER, DISCOVER, PULSAR, PLATINA, Etc

US $0.1-100
/ Piece
|
1,000 Pieces

(Min. Order)

###

Type: Sprocket
Material: Steel
Certification: ISO9001:2001
Number of Row: Single Row
Surface Treatment: Zinc Plated, Chrom Plated, Polishing, Copper Coated
Hardness: 35-50HRC

###

Customization:

###

Product Name Rear Sprocket
Material C45, A3, 40Cr, 20CrMnTi, 42CrMo, copper, stainless steel and so on as per your request
Process Forged
Heat Treatment High frequency quenching, heat treatment, hardened teeth
Surface Treatment Chrome plated, zinc plated, color painting, or customer requirement
Performance High precision, high wear resistance, low noise, smooth and steady, high strength
Model we can provide
YAMAHA  JOG50, SR50, YB50, YB80, YB100, JY55, CX50, V50, V80, V90, COMET, CPI, T50, NF50, 
NF55, NX50, AXIS90, AXIS100, RS100, DX100, SRZ150, YBR125, Y110,XH100, LC100, 
DX100, YAMAHA 100, YAMAHA250, ETC
  HONDA  GY6,BT50, LEAD50, WS100, WS110, CG125, CG150, WY125, WY150, GL125, CD100,
CD110, JH125, JH90, C70, C75, C100, C110, QJ110, L90, DY100, JL100,QJ100, SY150,
CB150,TITAN00/99,XL125, XL185, NXR125,H100S,ETC
  SUZUKI  FR50,  FR80, AD50, AD60, AG50, AG60, A100, AX100, K90, FB70, FB100, K100, K125,
MAX100, GP125, GS125 ,ETC
  BAJAJ  BOXER, DISCOVER, PULSAR, PLATINA, ETC
US $0.1-100
/ Piece
|
1,000 Pieces

(Min. Order)

###

Type: Sprocket
Material: Steel
Certification: ISO9001:2001
Number of Row: Single Row
Surface Treatment: Zinc Plated, Chrom Plated, Polishing, Copper Coated
Hardness: 35-50HRC

###

Customization:

###

Product Name Rear Sprocket
Material C45, A3, 40Cr, 20CrMnTi, 42CrMo, copper, stainless steel and so on as per your request
Process Forged
Heat Treatment High frequency quenching, heat treatment, hardened teeth
Surface Treatment Chrome plated, zinc plated, color painting, or customer requirement
Performance High precision, high wear resistance, low noise, smooth and steady, high strength
Model we can provide
YAMAHA  JOG50, SR50, YB50, YB80, YB100, JY55, CX50, V50, V80, V90, COMET, CPI, T50, NF50, 
NF55, NX50, AXIS90, AXIS100, RS100, DX100, SRZ150, YBR125, Y110,XH100, LC100, 
DX100, YAMAHA 100, YAMAHA250, ETC
  HONDA  GY6,BT50, LEAD50, WS100, WS110, CG125, CG150, WY125, WY150, GL125, CD100,
CD110, JH125, JH90, C70, C75, C100, C110, QJ110, L90, DY100, JL100,QJ100, SY150,
CB150,TITAN00/99,XL125, XL185, NXR125,H100S,ETC
  SUZUKI  FR50,  FR80, AD50, AD60, AG50, AG60, A100, AX100, K90, FB70, FB100, K100, K125,
MAX100, GP125, GS125 ,ETC
  BAJAJ  BOXER, DISCOVER, PULSAR, PLATINA, ETC

Sprocket Basics

When it comes to sprockets, it’s important to understand the basics of design. This includes chain size and number of teeth. The number of teeth will vary depending on the type of chain and application. When determining the number of teeth, the angle between the teeth should be at least 360 degrees.
sprocket

size

There are many factors to consider when choosing the correct sprocket size. The first thing to do is to determine if the sprocket is a double sprocket or a single sprocket. Also available in a variety of sizes. To determine the exact size, you should measure the distance between the grooves of the sprocket teeth and their opposite tooth slots. The distance between these two points is called the caliper diameter.
The size of the sprockets also varies depending on the type of chain. Large sprockets have arms, while smaller sprockets usually don’t. The arms reduce weight and inertia, making them more economical to operate. Some sprockets also have openings, which make them easier to assemble and disassemble. Some sprockets are also plated for a stronger construction. Some sprockets are manufactured with flame or induction hardened parts.
Sprockets are often used in conveyors, pallet conveyors and other conveying systems. The size of the sprocket should match the size of the chain. A caliper will help you determine if the sprocket has worn teeth. Another way to identify worn sprockets is to measure their diameter.
In addition to size, sprockets should have the correct pitch and center distance. This will help keep the roller chain taut. The chain should be clean and properly lubricated. There should be a small gap between the pin and bushing so that oil can pass through the sprocket and chain. In addition to this, the center-to-center distance between the chain and the sprocket should be at least 1.5 times the diameter of the sprocket.
The chain should have at least 17 teeth, which is common in the industry. Having smaller spacing will reduce mechanical losses and noise. However, larger sprocket sizes are best for applications with higher workloads.

Material

Sprockets are mechanical parts that mesh with the chain to move the chain. It is made of metal or reinforced plastic and usually resembles a gear. It is a gear design for a specific type of chain. Most sprocket and chain systems work the same way, although they vary in material and pitch.
There are three basic types of sprockets: single-strand, double-strand, and triple-strand. The length and number of teeth for each type are specified by various standards. For reference, the ISO-DIN standard is shown. Most sprockets are made of alloy steel and are case hardened and tempered in the tooth area. They also have a hub and a key for mounting.
Metal sprockets can be made of steel or aluminum alloys. While steel is a more durable material, aluminum sprockets are more attractive. Steel is the best material for long rides, while aluminum sprockets are better for casual riding.
In addition to automotive and industrial applications, sprockets are used in oil and gas, textile machinery, instrumentation and mechanical transmission. Many types of sprockets are interchangeable with each other. For added protection, they can also be galvanized to prevent rust. The main methods of galvanizing sprockets are hot-dip galvanizing and electro-galvanizing.
Sprockets are usually made of steel or aluminum. Their design is similar to that of gears, although they are more widely spaced than their counterparts. They can also span longer distances than gears, allowing them to be used for power transmission.
sprocket

Function

A chain drive is a common type of mechanical transmission in which sprockets are used to help reduce the speed of a moving object. Sprockets can have horizontal, vertical or inclined pitch and are usually used in pairs. The teeth of the sprocket mesh with the rollers on the drive chain, reducing the speed. These sprockets are usually made of metal, but can also be made of plastic or composite materials.
The role of the sprocket is to transmit motion from the output shaft of the engine to the rear wheels. For this, the front sprocket needs to rotate at the same speed as the engine output shaft. It can be mounted either on the drive track or on the front of the vehicle. A third sprocket can be connected to the drive track. In addition, the front sprocket is used to pull the drive chain. This will help transfer power from the engine to the rear wheels, allowing the motorcycle to travel forward. The side plates of the chain also help transmit chain tension.
The bushings are subjected to the tension applied to the chain as it passes through the sprockets thousands of times per minute. This puts pressure on the pin inside the bushing. Additionally, the pins must withstand bending and shearing forces transmitted from the plate to the bushing. The pins must also withstand impact and have high tensile strength. If the pin is worn, it will need to be replaced or repaired.
Sprockets power the chain-driven motion system and carry heavy loads. Proper selection of sprockets can prevent damage to your equipment. To do this, you need to select the appropriate sprocket based on the type of assembly and system specification.
sprocket

maintain

Sprocket maintenance is an important part of motorcycle maintenance. Failure to do so will result in frequent chain changes and additional costs. Regular maintenance of your chain will help ensure your chain will last 30,000 miles or more. By comparison, a poorly maintained chain only lasts 10,000 miles.
Checking the sprocket is very easy. First, remove the chain and align it. Next, check for any foreign objects. If you see a damaged sprocket, you need to replace it. If you can’t replace a worn sprocket, you can buy a new chain. However, the new chain will not last as long as the old one.
Check for signs of rust. Rust can form on the chain due to exposure to humidity and heat. When the pins or rollers get rusted, the seals are damaged. If the pins or rollers are rusted, it’s time to replace the chain.
Regular maintenance of the chain is important to prevent kinks and slippage. This can cause excessive wear on the sprockets and chain. If the teeth are worn, the chain will not be able to properly grip the sprocket, resulting in difficult shifting and severe vibration.
If your chain is several years old, it is important to lubricate it every few months to prevent rust. It is also important to clean the chain thoroughly before lubricating to keep it clean and lubricated. Non-petroleum-based cleaners can help remove grit that may have built up. If you use the chain for a long time, you will need to clean it every 300-600 miles.

China Sprocket 14t-520 Rear Sprocket for Motorcycle     chain sprocketChina Sprocket 14t-520 Rear Sprocket for Motorcycle     chain sprocket
editor by czh 2022-12-21

Chain Sprocket

As one of the leading chain sprocket manufacturers, suppliers, and exporters of mechanical products, We offer chain sprockets and many other products.

Please contact us for details.

Manufacturer supplier exporter of chain sprockets.

Recent Posts