China manufacturer Motorcycle Transmission Chain X-Ring Super Heavy Duty X-Ring Chain with Connecting Link

Product Description

Product Parameters


Product Name

Motorcycle Gear & Chain Kit 530 


Alloy Steel

Chain NO


Pitch (mm)


Bush Type




Pin Dia.(mm)


Pin Length(mm)


Roller Dia(mm)


Plate Thickness Inner(mm)


Plate Thickness Outer(mm)


Tensile Strength(kn)





Product Details


  • SFR Super O-Ring chain is a light-weight design of high-performance sealing chain, maintaining maximum strength while reducing the chain width and weight. The optimized O-ring overcomes the shortcomings of ordinary sealing chain, offering 150% lifespan of ordinary O-ring.
    Silver outer + black inner, CHINAMFG outer + black inner colour configurations available. migh wear-resistant, maintenance-free lubrication , low cost O-rings


Product Packing

Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.

Product Usage


We strongly recommends you to lubricate a new connecting link before connecting both ends of the new chain(Fig. B) Clip type connecting link (FJ,RJ) The open end of the clip must be set opposite the chain drive direction(Fig. C). FJ type connecting link has Press Fit Outer Plates that require SFR Cutting &Riveting Tool to press on the side plates. Rivet type connecting link(ZJ) Use MOTOMAX KM500R Cutting & Riveting Tool to press fit connecting link plates and precisely rivet pin head by flare dimensions we recommend. 5.For chain sag adjustment, follow the recommendation in motorcycle owner’s manual. Standard chain sag with the load of riders is 10 mm(Fig. D).


1.Be sure to consult your distributor / local dealer or check with SFR chain catalogue or application chart whether this chain and connecting link are applicable for your motorcycle. Improper selection and use may cause serious damage or injury.

2.Cut the old chain at its joint part. If your motorcycle came with an endless chain or a chain with Rivet type connecting link(ZJ), use SFR Cutting & Riveting Tool or similar cutting tool.

3.Fit the new chain to the end of the old one, using a new connecting link. By turning the rear wheel, the new chain will come in position(Fig. A) 


  • Motorcycle Chain Handing Instructions

Drive chain is a critical safety part for motorcycle driving. To ensure safe drive, you are kindly requested to peruse and observe your motorcycle owner’s manual and the following instructions.


Company Introduction

SFR Chain Group has been pushing its way to the leading positions in the industrial chain industry since last century.

With stringent quality controls, we strive to exceed our customers’ expectations in terms of quality and service. Our products aresold to more than 80 countries in every industry that requires moving, conveying, lifting or transmitting power.





Our Services & Strength

With a monthly production output of over 2.2 million pieces, SFR motorcycle chain is the cornerstone of the group. As 1 of theWorld’s top manufacturers of motorcycle chain, we serve some of the largest brands in the automotive sector and within our widerange there is always a chain to go with every power and use, from urban mopeds to high powered racing motorbikes, dirt bikes orATV quads.


SFR operates 4 fully owned factories and 1 joint venture, certified by ISO9001 and IATF 16949 Quality Management System. Ourcommitment to R&D led SFR to establish stable cooperation with several CHINAMFG universities and research institutes in China,as well as setting up an Intelligent Chain Drive Research Center within the group, altogether resulting in its more than 70
patents. This allows us to offer the widest range of power transmission and conveyor chain at the most competitive prices.We at SFR Chain always adhere to the group’s spirit of integrity, efficiency and innovation: “We strive to offer the best productsand service to our customers”.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Warranty: 1 Year Guarantees
Type: Motorcycle Chain
Material: Alloy Steel
Certification: ISO9001:2001, CE
Number of Row: Single/Double/Triplex
Surface Treatment: Zinc Plated, Gold Coated, Copper Coated
US$ 5/Piece
1 Piece(Min.Order)

Request Sample



Customized Request

transmission chain

How does the elongation of a transmission chain affect its lifespan?

Transmission chains are subject to gradual elongation over time as a result of wear and fatigue. The elongation of a transmission chain refers to the increase in its length due to the stretching of the chain’s components. Here’s a detailed explanation of how elongation affects the lifespan of a transmission chain:

1. Increased Slack: As a transmission chain elongates, it develops more slack between the chain links. The increased slack reduces the chain’s tension and can negatively impact its performance. Excessive slack can lead to chain skipping, misalignment, and reduced power transmission efficiency. This can cause vibrations, noise, and accelerated wear on the chain and sprockets.

2. Accelerated Wear: Elongation puts additional stress on the chain’s pins, bushings, and rollers. The increased tension and movement between the chain’s components lead to accelerated wear and fatigue. This can result in chain elongation becoming a self-perpetuating problem, as the worn components further contribute to elongation and reduced performance.

3. Decreased Load Capacity: Elongation reduces the effective pitch length of the transmission chain, resulting in decreased load-carrying capacity. The reduced load capacity can limit the chain’s ability to handle heavy loads or transmit power effectively. This can lead to premature failure or damage to the chain and associated machinery.

4. Increased Maintenance Requirements: Elongated transmission chains require more frequent maintenance and adjustment to maintain proper tension and performance. Regular monitoring and adjustment of chain tension are necessary to minimize wear, prevent excessive elongation, and ensure optimal power transmission. Failure to address elongation promptly can lead to more severe damage to the chain and other components, resulting in costly repairs and downtime.

5. Reduced Service Life: The elongation of a transmission chain directly affects its service life. As the chain elongates, its performance, efficiency, and load-carrying capacity gradually deteriorate. The rate of elongation depends on various factors such as chain quality, operating conditions, lubrication, and maintenance practices. Over time, if elongation is not addressed, the chain may become unable to perform its intended function effectively, leading to chain failure and the need for replacement.

To mitigate the negative effects of elongation and extend the lifespan of a transmission chain, regular maintenance, including proper lubrication and tension adjustment, is crucial. Periodic inspections for signs of wear, elongation, and fatigue should be conducted to identify potential issues early and take appropriate corrective measures. Additionally, selecting high-quality chains and following manufacturer recommendations for installation, operation, and maintenance can help minimize elongation and maximize the chain’s lifespan.

transmission chain

How does the precision of manufacturing impact the performance of a transmission chain?

The precision of manufacturing plays a crucial role in the performance and reliability of a transmission chain. Here’s a detailed answer to the question:

1. Accurate Chain Pitch: The precision of manufacturing ensures that the chain pitch, which is the distance between consecutive chain links, is consistent and accurate. A precise chain pitch is essential for proper engagement with the sprockets and ensures smooth power transmission.

2. Uniform Chain Link Dimensions: Precise manufacturing ensures that the dimensions of the chain links are uniform throughout the chain. This uniformity is crucial for maintaining proper alignment, load distribution, and engagement with the sprockets.

3. Consistent Roller Diameter: In roller chains, the diameter of the rollers is an important factor in reducing friction and wear. Precise manufacturing ensures that the roller diameter is consistent, allowing for smooth rolling action and efficient power transfer.

4. Straight Side Plates: The side plates of a transmission chain need to be straight and parallel to ensure proper chain alignment and engagement with the sprockets. Precise manufacturing ensures that the side plates are accurately formed, minimizing the risk of misalignment and premature wear.

5. Quality Control and Tolerance Management: Precision manufacturing involves rigorous quality control measures to ensure that the chain components meet the required specifications and tolerances. This helps to maintain the overall integrity and performance of the chain.

6. Reduced Noise and Vibration: A well-manufactured transmission chain with precise dimensions and uniform components results in reduced noise and vibration during operation. This contributes to a quieter and smoother running system, enhancing the overall efficiency and comfort.

7. Enhanced Durability and Lifespan: The precision of manufacturing directly impacts the durability and lifespan of a transmission chain. Accurate dimensions, uniform components, and proper tolerances ensure that the chain can withstand the expected loads, resist wear, and maintain its performance over an extended period.

It’s important to select transmission chains from reputable manufacturers known for their precision manufacturing processes and adherence to quality standards. Proper installation, regular maintenance, and following manufacturer guidelines are also crucial for maximizing the performance and longevity of the transmission chain.

transmission chain

What are the maintenance requirements for transmission chains?

Maintenance plays a crucial role in ensuring the optimal performance and longevity of transmission chains. Here’s a detailed explanation:

1. Regular Inspection: Regular visual inspections should be conducted to check for any signs of wear, damage, or misalignment. Inspect the chain for signs of elongation, corrosion, broken or damaged links, and excessive wear on the sprockets.

2. Lubrication: Proper lubrication is essential to minimize friction, reduce wear, and extend the life of the chain. Follow the manufacturer’s recommendations for the type and frequency of lubrication. Apply lubricant evenly along the entire length of the chain, ensuring that it penetrates between the components.

3. Tensioning: Maintaining the correct tension in the chain is important for smooth operation and to prevent chain slippage. Follow the manufacturer’s guidelines for the recommended tensioning method and the appropriate tension level. Check the tension regularly and adjust as necessary.

4. Cleaning: Regular cleaning helps remove dirt, debris, and contaminants that can accelerate wear and cause chain failure. Use a suitable cleaning agent or solvent to clean the chain, and ensure it is thoroughly dry before applying lubrication.

5. Alignment: Proper alignment between the chain and the sprockets is crucial for smooth operation and to prevent premature wear. Check the alignment regularly and make any necessary adjustments to ensure the chain runs straight and smoothly along the sprockets.

6. Replacement of Worn Components: Over time, transmission chains may experience wear and elongation. It is important to replace worn-out components such as links, pins, and sprockets to maintain the proper functioning of the chain.

7. Environmental Considerations: Consider the operating environment of the transmission chain and take appropriate measures to protect it from corrosive substances, extreme temperatures, or excessive humidity. Apply corrosion-resistant coatings or use stainless steel chains when necessary.

8. Record Keeping: Maintain a record of maintenance activities, including lubrication schedules, tension adjustments, inspections, and component replacements. This record will help track the maintenance history and identify any patterns or issues that may arise.

It is important to consult the manufacturer’s guidelines and recommendations for specific maintenance requirements based on the type and model of the transmission chain. Adhering to proper maintenance practices will help ensure the reliability, performance, and longevity of the transmission chain in various applications.

China manufacturer Motorcycle Transmission Chain X-Ring Super Heavy Duty X-Ring Chain with Connecting Link  China manufacturer Motorcycle Transmission Chain X-Ring Super Heavy Duty X-Ring Chain with Connecting Link
editor by CX 2024-05-08

Chain Sprocket

As one of the leading chain sprocket manufacturers, suppliers, and exporters of mechanical products, We offer chain sprockets and many other products.

Please contact us for details.

Manufacturer supplier exporter of chain sprockets.

Recent Posts